25 August 2014 Thickness measurements of metal thin films with a plasmonic near-field scanning nanoscope using a resonant ridge aperture
Author Affiliations +
Abstract
Herein, we apply a plasmonic near-field scanning nanoscope using a resonant ridge aperture to measure the thickness of a metal thin film. We determine an appropriate design for the resonant ridge aperture to obtain a high dynamic range and sensitivity for the measurement. As a proof of concept, we measure the thickness of gold thin films with thicknesses ranging between 5 and 30 nm. We demonstrate that the experimental and calculated results are in good agreement with one another. Also, we find that any observed errors are caused by uncertainties in the material properties of the metal and by tolerances in the fabrication of the ridge aperture. By comparing these thickness measurements with those taken with atomic force microscopy, we are able to obtain an uncertainty of ∼5% for our thickness measurements. Regarding the spatial resolution, theoretical analysis indicates that the thickness of a metal thin film should be detectable below 40 nm.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2014/$25.00 © 2014 SPIE
Taekyong Lee, Seonghyeon Oh, and Jae W. Hahn "Thickness measurements of metal thin films with a plasmonic near-field scanning nanoscope using a resonant ridge aperture," Journal of Nanophotonics 8(1), 083075 (25 August 2014). https://doi.org/10.1117/1.JNP.8.083075
Published: 25 August 2014
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metals

Thin films

Gold

Plasmonics

Near field

Near field scanning optical microscopy

Quartz

Back to Top