6 March 2015 Low driving voltage in polymer light-emitting diodes with CdS nanoparticles as an electron transport layer
Mohsen Mohsennia, Maryam Massah Bidgoli, Farhad Akbari Boroumand
Author Affiliations +
Abstract
Water-soluble cadmium sulfide (CdS) nanoparticles were synthesized through aqueous thermochemical method using thioglycolic acid as a capping agent. The resulting CdS nanoparticles were characterized using x-ray diffraction, field-emission scanning electron microscopy, ultraviolet–visible, and photoluminescence spectroscopy. The CdS prepared has been used as an electron transport layer (ETL) in a polymer light-emitting diode (PLED) with the structure of poly(ethylene terephthalate)/indium tin oxide/poly(3,4-ethylenedioxythiophene):polystyrene sulfonate/poly[2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene/CdS/aluminium (PET/ITO/PEDOT:PSS/MEH-PPV/CdS/Al). The performance of the fabricated device containing CdS nanoparticles as an ETL was compared with the device with the structure of PET/ITO/PEDOT:PSS/MEH-PPV/Al. According to the obtained results, it was shown that the ETL yields a higher current and lower turn-on voltage. The improvement was ascribed to the step barrier theory and hole blocking effect of the CdS layer. These results show that the CdS layer could be very useful in the fabrication of efficient PLEDs.
© 2015 Society of Photo-Optical Instrumentation Engineers (SPIE) 1934-2608/2015/$25.00 © 2015 SPIE
Mohsen Mohsennia, Maryam Massah Bidgoli, and Farhad Akbari Boroumand "Low driving voltage in polymer light-emitting diodes with CdS nanoparticles as an electron transport layer," Journal of Nanophotonics 9(1), 093081 (6 March 2015). https://doi.org/10.1117/1.JNP.9.093081
Published: 6 March 2015
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cadmium sulfide

Organic light emitting diodes

Nanoparticles

Electron transport

Absorption

Electroluminescence

Polymers

Back to Top