Optimization of H2 thermal annealing process for the fabrication of ultra-low loss sub-micron silicon-on-insulator rib waveguides

Cyril Bellegarde; Erwine Pargon; Corrado Sciancalepore; Camille Petit-Etienne; Olivier Lemonnier; Karen Ribaud; Jean-Michel Hartmann; Philippe Lyan

doi:10.1117/12.2289564

22 February 2018 Optimization of H₂ thermal annealing process for the fabrication of ultra-low loss sub-micron silicon-on-insulator rib waveguides

Cyril Bellegarde, Erwine Pargon, Corrado Sciancalepore, Camille Petit-Etienne, Olivier Lemonnier, Karen Ribaud, Jean-Michel Hartmann, Philippe Lyan

Author Affiliations +

Proceedings Volume 10537, Silicon Photonics XIII; 1053706 (2018) https://doi.org/10.1117/12.2289564
Event: SPIE OPTO, 2018, San Francisco, California, United States

Abstract

The superior confinement of light provided by the high refractive index contrast in Si/SiO₂ waveguides allows the use of sub-micron photonic waveguides. However, when downscaling waveguides to sub-micron dimensions, propagation losses become dominated by sidewall roughness scattering. In a previous study, we have shown that hydrogen annealing after waveguide patterning yielded smooth silicon sidewalls. Our optimized silicon patterning process flow allowed us to reduce the sidewall roughness down to 0.25 nm (1σ) while maintaining rectangular Strip waveguides. As a result, record low optical losses of less than 1 dB/cm were measured at telecom wavelengths for waveguides with dimensions larger than 350 nm. With Rib waveguides, losses are expected to be even lower. However, in this case the Si reflow during the H₂ anneal leads to the formation of a foot at the bottom of the structure and to a rounding of its top. A compromise is thus to be found between low losses and conservation of the rectangular shape of the Rib waveguide. This work proposes to investigate the impact of temperature and duration of the H₂ anneal on the Rib profile, sidewalls roughness and optical performances. The impact of a Si/SiO₂ interface is also studied. The introduction of H₂ thermal annealing allows to obtain very low losses of 0.5 dB/cm at 1310 nm wavelength for waveguide dimensions of 300-400 nm, but it comes along an increase of the pattern bottom width of 41%, with a final bottom width of 502 nm.

Conference Presentation

Citation Download Citation

Cyril Bellegarde, Erwine Pargon, Corrado Sciancalepore, Camille Petit-Etienne, Olivier Lemonnier, Karen Ribaud, Jean-Michel Hartmann, and Philippe Lyan "Optimization of H₂ thermal annealing process for the fabrication of ultra-low loss sub-micron silicon-on-insulator rib waveguides", Proc. SPIE 10537, Silicon Photonics XIII, 1053706 (22 February 2018); https://doi.org/10.1117/12.2289564

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available