Paper
17 June 1996 Major corrections to published curves for atmospheric propagation
Author Affiliations +
Abstract
Descriptions are given of major errors which appear in several published curves showing atmospheric attenuation at frequency intervals between 10 and 1000 GHz. Three cases are discussed, two for clear-air conditions and one for fog. In one example, the attenuation at 4 km elevation has been mislabeled as 9150 km (or 30,000 feet) for the 10 to 400 GHz range. This error has appeared in several journal articles, vendors' catalogs, short-course notes, and a recently-published book. In a second case the attenuation peak near 22.3 GHz (due to water vapor absorption) has been plotted at 20 GHz. The third case deals with an error pertaining to attenuation in fog for frequencies between 10 and 1000 GHz. Specific information and corrections are given for all three cases. The net result of these errors is that development of sensor and communications applications has been impeded because the errors usually make atmospheric losses appear to be greater than they really are.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James C. Wiltse "Major corrections to published curves for atmospheric propagation", Proc. SPIE 2742, Targets and Backgrounds: Characterization and Representation II, (17 June 1996); https://doi.org/10.1117/12.243021
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal attenuation

Atmospheric propagation

Fiber optic gyroscopes

Absorption

Atmospheric modeling

Atmospheric sensing

Extremely high frequency

Back to Top