Paper
5 June 1998 Influence of fiber drawing on optical UV attenuation of all-silica fibers with undoped core
Valery Kh. Khalilov, Karl-Friedrich Klein, Arkady V. Amosov
Author Affiliations +
Proceedings Volume 3262, Surgical-Assist Systems; (1998) https://doi.org/10.1117/12.309485
Event: BiOS '98 International Biomedical Optics Symposium, 1998, San Jose, CA, United States
Abstract
The appearance of intrinsic defects, especially in the UV spectral range, has been investigated in step-index fibers having undoped silica core and a fluorine doped cladding; the concentration of the dominant impurities ranged from 2 to 50 ppm and from 400 to 600 ppm. The optical attenuation from 190 to 500 nm was not only determined in fibers, but also in the preforms and core rods. The absorption bands at 248 nm, at 340 nm and at 210 nm were observed. While the preform process has no significant influence, the fiber drawing process influences greatly the defects' concentration: the 210 nm band increases slightly, the 248 nm band increases significantly, the 340 nm band decreases. No influences of the fluorine cladding was determined with one exception when the chlorine content has been increased in the cladding of special species. The possible reactions and related defects will be described for the tested low-OH material. Especially the influence of chlorine will be discussed.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Valery Kh. Khalilov, Karl-Friedrich Klein, and Arkady V. Amosov "Influence of fiber drawing on optical UV attenuation of all-silica fibers with undoped core", Proc. SPIE 3262, Surgical-Assist Systems, (5 June 1998); https://doi.org/10.1117/12.309485
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Chlorine

Silica

Absorption

Cladding

Signal attenuation

Glasses

Oxygen

RELATED CONTENT


Back to Top