Paper
18 November 1999 Fluorescence polarization sensing
Author Affiliations +
Proceedings Volume 3857, Chemical Microsensors and Applications II; (1999) https://doi.org/10.1117/12.370274
Event: Photonics East '99, 1999, Boston, MA, United States
Abstract
We describe a new approach to fluorescence sensing based on fluorescence polarization measurements. The sensing device consists of an analyte sensitive fluorescence probe and a reference fluorophore which is not affected by the analyte. Combined emission from probe and reference passes through two adjacent orthogonally oriented polarizers and is viewed with second analyzer polarizer. Changes in the probe intensity result in changes in the polarization of the combined emission. The analyzer polarizer is rotated to yield equal intensity from both sides of two orthogonally oriented polarizers. So constructed sensor earlier was used for manual visual detection of RhB in intralipid and to measure pH using 6-carboxyfluorescein. A sensor equipped with the simple electronic detection system of a dual photocell and a Watson bridge improves the accuracy. We used this device with UV hand lamp, electroluminescent light source or LED to detect pH, oxygen and calcium. This sensing method is generic and can be used with any fluorophore which displays an analyte-dependent change in intensity.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zygmunt Gryczynski, Ignacy Gryczynski, and Joseph R. Lakowicz "Fluorescence polarization sensing", Proc. SPIE 3857, Chemical Microsensors and Applications II, (18 November 1999); https://doi.org/10.1117/12.370274
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarization

Sensors

Luminescence

Polarizers

Oxygen

Calcium

Visualization

Back to Top