Paper
13 November 2001 Stoichiometry of DC sputtered WO3
Peter A. Sieck, Kyle Hukari, Joe Countrywood, Vladimir Kodash
Author Affiliations +
Abstract
Thin films of WO3 were deposited by DC magnetron sputtering at different oxygen partial pressures and different target surface oxidation states. Evaluation of the film properties was carried out using electrochemical and optical techniques. Electrochromic coloration efficiency is compared over a range of injected charge. Methods for determining the stoichiometry of the films are suggested. Excess electrochemically injected charge in the WO3 films is quantified and related to super-stoichiometry. Absorption measured in the as-deposited films is quantified and related to sub-stoichiometry. Deposition rate is an important consideration in the development of cost models for production of electrochromic devices. For many types of dielectric thin films deposited in in-line sputtering systems, the only concern is the onset of optical absorption. For WO3, many other aspects of the films' behavior may be affected. In this paper, ways to evaluate stoichiometry are examined in an effort to better understand the effect of changing process parameters on the films.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter A. Sieck, Kyle Hukari, Joe Countrywood, and Vladimir Kodash "Stoichiometry of DC sputtered WO3", Proc. SPIE 4458, Solar and Switching Materials, (13 November 2001); https://doi.org/10.1117/12.448259
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Oxides

Oxygen

Absorption

Metals

Sputter deposition

Hydrogen

Tungsten

Back to Top