Paper
21 November 2001 Micromachining of TiNi shape memory alloy by excimer laser ablation
Author Affiliations +
Proceedings Volume 4592, Device and Process Technologies for MEMS and Microelectronics II; (2001) https://doi.org/10.1117/12.449012
Event: International Symposium on Microelectronics and MEMS, 2001, Adelaide, Australia
Abstract
In this paper we investigate excimer laser micromachining of TiNi shape memory alloy using an image projection system as an alternative to photolithographic patterning. We report on the characteristics of material removal by KrF excimer laser induced ablation at 248 nm and the dependence of material removal rates on laser parameters such as fluence and pulse frequency. Fluences at the workpiece using a 10x projection lens were up to 2.5 J cm-2 with pulse repetition rates up to 100Hz. Conventional chrome-on-quartz masks were used for pattern transfer. Material removal mechanisms and rates of material removal are compared with those observed during excimer laser micromachining of polymers and ceramics and limitations on achievable lateral and depth resolution explored. Data obtained by a variety of characterization methods are correlated to assess the effects of laser induced damage.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sam T. Davies, Erol C. Harvey, Hengyi Jin, Jason P. Hayes, and Muralihar K. Ghantasala "Micromachining of TiNi shape memory alloy by excimer laser ablation", Proc. SPIE 4592, Device and Process Technologies for MEMS and Microelectronics II, (21 November 2001); https://doi.org/10.1117/12.449012
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser ablation

Excimer lasers

Micromachining

Shape memory alloys

Metals

Thin films

Laser damage threshold

RELATED CONTENT


Back to Top