Paper
18 June 2002 Pulsed laser ablation of IC packages for device failure analyses
Ming Hui Hong, ZhiHong Mai, G. X. Chen, Thomas Thiam, Wen Dong Song, Yongfeng Lu, Chye Eng Soh, Tow Chong Chong
Author Affiliations +
Abstract
Pulsed laser ablation of mold compounds for IC packaging in air and with steam assistance is investigated. It is applied to decap IC packages and expose computer CPU dies for the device failure analyses. Compared with chemical decapping, the laser ablation has advantages of being fast speed, non- contact and dry processing. Laser ablation with the steam assistance results in higher ablation rate and wider ablated crater with much smoother surface morphology. It implies that the steam assisted laser ablation can achieve a faster and better quality laser processing. Audible acoustic wave and plasma optical signal diagnostics are also carried out to have a better understanding of the mechanisms behind. Light wavelength and laser fluence applied in the decapping are two important parameters. The 532 nm Nd:YAG laser decapping at a low laser fluence can achieve a large decapping area with a fine ablation profile. IC packages decapped by the laser ablation show good quality for the device failure analyses.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ming Hui Hong, ZhiHong Mai, G. X. Chen, Thomas Thiam, Wen Dong Song, Yongfeng Lu, Chye Eng Soh, and Tow Chong Chong "Pulsed laser ablation of IC packages for device failure analyses", Proc. SPIE 4637, Photon Processing in Microelectronics and Photonics, (18 June 2002); https://doi.org/10.1117/12.470669
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser ablation

Plasma

Excimer lasers

Failure analysis

Acoustics

Epoxies

Pulsed laser operation

RELATED CONTENT

Steam-assisted laser ablation of metal substrate
Proceedings of SPIE (February 25 2002)
Ablation processes induced by UV lasers in metals and ceramics
Proceedings of SPIE (September 14 1998)
Laser ablation of Si in water and ambient air
Proceedings of SPIE (February 25 2002)
Diagnostics and real-time monitoring of pulsed laser ablation
Proceedings of SPIE (February 25 2002)

Back to Top