Paper
3 June 2002 Through wafer via hole by reactive ion etching of GaAs
Yuwen Chen, Chee Leong Tan, Boon Siew Ooi, Kaladhar Radhakrishnan, Geok Ing Ng
Author Affiliations +
Abstract
Through wafer via hole connection has found applications in photonic and microelectronic devices. Such vias provide higher packing densities, improved gain and simplified device layout. In this paper, reactive ion etching of GaAs via hold has been systematically studied using CCl2F2 as the reactive gas. The effects of process pressure and r.f. power on the etch rate and the resultant etch profiles have been investigated. It was found that the etch rate increased linearly with the increase of process pressure for values below 50 mTorr. The process pressure had a significant influence on the etch profiles. At low process pressure, anisotropic profiles were observed. The etch rate increased as the r.f. power was increased due to the increased excitation of reactive species as well as higher ion energies and improved sputter desorption of the etch products. Reproducible, and good etch profiles with etch rate as high as 1.55 micrometers /min. could be obtained at a process pressure and r.f. power of 50 mTorr and 150 W, respectively. Devices have been successfully fabricated which employed the via hole process developed in this study. The via hole connections for the grounding were found to be working very well as confirmed by DC measurements.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yuwen Chen, Chee Leong Tan, Boon Siew Ooi, Kaladhar Radhakrishnan, and Geok Ing Ng "Through wafer via hole by reactive ion etching of GaAs", Proc. SPIE 4652, Optoelectronic Interconnects, Integrated Circuits, and Packaging, (3 June 2002); https://doi.org/10.1117/12.469559
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Gallium arsenide

Reactive ion etching

Plasmas

Ions

Oscillators

Polymers

RELATED CONTENT

Multilayer Resist Systems Using Polysiloxanes As Etch Masks
Proceedings of SPIE (November 07 1983)
Overview Of Dry-Etch Techniques
Proceedings of SPIE (August 20 1986)
A Review of Magnetron Etch Technology
Proceedings of SPIE (January 30 1990)
Wafer charging in different types of plasma etchers
Proceedings of SPIE (February 01 1992)
The effects of etch chemistry on the etch rates of...
Proceedings of SPIE (March 29 2006)

Back to Top