Paper
5 December 2005 A novel two-stage erbium amplified spontaneous emission fiber source with 80nm bandwidth
Author Affiliations +
Proceedings Volume 6019, Passive Components and Fiber-based Devices II; 601948 (2005) https://doi.org/10.1117/12.634305
Event: Asia-Pacific Optical Communications, 2005, Shanghai, China
Abstract
In this paper, a practical two-stage scheme is suggested for generating a C+L-band erbium-doped fiber amplified spontaneous emission (ASE) broadband light source. A considerable power increase of the L-band ASE spectrum is achieved by injecting the C-band ASE into the long section erbium-doped fiber. The C+L-band ASE source is obtained by combining the enhanced L-band ASE with the C-band ASE from two stages respectively. A spectrum flat ASE source with nearly 80nm bandwidth and about 15.9dBm output power is obtained with a total pump power of 180mW. Namely, the pump conversion efficiency is about 21.6%. Such a broadband incoherent light source is desirable for various applications in some areas like sliced wavelength- division multiplexed local-access networks, characteristic measurement for dense wavelength-division multiplexed components, and fiber-optic sensor systems etc.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiulin Wang, Hai Ming, and Wencai Huang "A novel two-stage erbium amplified spontaneous emission fiber source with 80nm bandwidth", Proc. SPIE 6019, Passive Components and Fiber-based Devices II, 601948 (5 December 2005); https://doi.org/10.1117/12.634305
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
L band

Superluminescent sources

Erbium

Fiber amplifiers

Light sources

Multiplexing

Broadband telecommunications

Back to Top