Paper
18 May 2011 Liquid core fibre Bragg grating based refractive index sensor formed by femtosecond assisted chemical etching technique
P. Saffari, Z. Yan, K. Zhou, L. Zhang, I. Bennion
Author Affiliations +
Proceedings Volume 7753, 21st International Conference on Optical Fiber Sensors; 77538P (2011) https://doi.org/10.1117/12.885086
Event: 21st International Conference on Optical Fibre Sensors (OFS21), 2011, Ottawa, Canada
Abstract
We report the fabrication of a refractive index (RI) sensor based on a liquid core fibre Bragg grating (FBG). A micro-slot FBG was created in standard telecom optical fibre employing the tightly focused femtosecond laser inscription aided chemical etching. A micro-slot with dimensions of 5.74(h) × 125(w) × 1388.72(l) μm was engraved across the whole fibre and along 1mm long FBG which gives advantage of a relatively robust liquid core waveguide. The device performed the refractive index sensitivity up to about 742.72 nm/RIU.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. Saffari, Z. Yan, K. Zhou, L. Zhang, and I. Bennion "Liquid core fibre Bragg grating based refractive index sensor formed by femtosecond assisted chemical etching technique", Proc. SPIE 7753, 21st International Conference on Optical Fiber Sensors, 77538P (18 May 2011); https://doi.org/10.1117/12.885086
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Liquids

Refractive index

Sensors

Femtosecond phenomena

Wet etching

Cladding

Back to Top