Spatially Resolved Non-Contact Surface Photovoltage In Semiconductors

Daniel Guidotti

doi:10.1117/12.940389

1 September 1987 Spatially Resolved Non-Contact Surface Photovoltage In Semiconductors

Daniel Guidotti

Proceedings Volume 0774, Lasers in Microlithography; (1987) https://doi.org/10.1117/12.940389
Event: Microlithography Conferences, 1987, Santa Clara, CA, United States

Abstract

The early work of Brattain and Bardeen demonstrated that under illumination, a semi-conductor surface develops a potential which can be measured with non-contact capacitive coupling. Since then, the surface photo-voltage (PV) effect has received sporadic experimental as well as theoretical considerations. A number of experiments have been reported (with and without contacts) which make use of both DC and AC surface PV. In the latter form, the incident light is modulated at frequencies ranging from a few Hz to a few MHz. Both the DC and AC embodiments of the surface photo-voltage effect have been used to study various minority and majority carrier transport mechanisms in the presence of various degrees of inversion (or accumulation) of the semiconductor surface. Theoretical treatment of the PV effect has also been sporadic and lacking in completeness. Existing models for the PV effect are either too simplified to accurately represent a physical semiconductor surface, or are too general to be useful for the interpretation of experimental data. It is nevertheless clear from theoretical considerations and from existing experimental results (using incident photon energies above and below the semiconductor bandgap) that the PV effect contains valuable quantitative information which is specific to the space charge region of a semiconductor surface or junction. It is the object of this paper to demonstrate that the PV effect affords the opportunity to quantitatively measure many of the technologically important properties of a semicon-ductor surface or junction without contacting the sample and with a spatial resolution that is consistent with very large scale integration (VLSI) technology. It is also shown that non-contact PV is very sensitive to junction bias and can therefore be used to detect the on-off state of an operating transistor.

Citation Download Citation

Daniel Guidotti "Spatially Resolved Non-Contact Surface Photovoltage In Semiconductors", Proc. SPIE 0774, Lasers in Microlithography, (1 September 1987); https://doi.org/10.1117/12.940389

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Photovoltaics

Semiconductors

Very large scale integration

Spatial resolution

Transistors

Phase shifts

Semiconducting wafers

Show All Keywords

Keywords/Phrases

Search In:

Publication Years