The initial design of LAPAN's IR micro bolometer using mission analysis process

Bustanul A.; Irwan P.; Andi M. T.; Firman B.

doi:10.1117/12.2246439

8 December 2016 The initial design of LAPAN's IR micro bolometer using mission analysis process

Bustanul A., Irwan P., Andi M. T., Firman B.

Proceedings Volume 10030, Infrared, Millimeter-Wave, and Terahertz Technologies IV; 1003014 (2016) https://doi.org/10.1117/12.2246439
Event: SPIE/COS Photonics Asia, 2016, Beijing, China

Abstract

As new player in Infra Red (IR) sector, uncooled, small, and lightweight IR Micro Bolometer has been chosen as one of payloads for LAPAN’s next micro satellite project. Driven the desire to create our own IR Micro Bolometer, mission analysis design procedure has been applied. After tracing all possible missions, the Planck’s and Wien’s Law for black body, Temperature Responsivity (TR), and sub-pixel response had been utilized in order to determine the appropriate spectral radiance. The 3.8 – 4 μm wavelength were available to detect wild fire (forest fire) and active volcanoes, two major problems faced by Indonesia. In order to strengthen and broaden the result, iteration process had been used throughout the process. The analysis, then, were continued by calculating Ground pixel size, IFOV pixel, swath width, and focus length. Meanwhile, regarding of resolution, at least it is 400 m.

The further procedure covered the integrated of optical design, wherein we combined among optical design software, Zemax, with mechanical analysis software (structure and thermal analysis), such as Nastran and Thermal Desktop / Sinda Fluint. The integration process was intended to produce high performance optical system of our IR Micro Bolometer that can be used under extreme environment. The results of all those analysis, either in graphs or in measurement, show that the initial design of LAPAN’S IR Micro Bolometer meets the determined requirement. However, it needs the further evaluation (iteration). This paper describes the initial design of LAPAN’s IR Micro Bolometer using mission analysis process

Citation Download Citation

Bustanul A., Irwan P., Andi M. T., and Firman B. "The initial design of LAPAN's IR micro bolometer using mission analysis process", Proc. SPIE 10030, Infrared, Millimeter-Wave, and Terahertz Technologies IV, 1003014 (8 December 2016); https://doi.org/10.1117/12.2246439

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available