Paper
16 May 2017 Continuous palladium-based thin films for hydrogen detection
Author Affiliations +
Abstract
Metallic films of palladium (Pd) and palladium-tin (Pd-Sn) have been deposited by evaporation technique. They were used as sensitive material for optical sensor by measuring the variation of absorbance. All samples were then oxidized by annealing at 500°C in low vacuum atmosphere. All the films were investigated by X-Ray Diffraction (XRD), Atomic Force Microscopy (AFM) to observe the influence of the structure and morphology on the optical properties of the films, carrying useful information for the sensing properties of the different sensing materials. Furthermore, the sensing performances were tested by monitoring the variation on the optical absorbance induced during the absorption / desorption of hydrogen gas. While the use of Pd for gas sensing has been widely covered for electrical and SPR sensors, this work aims to extend our comprehension of the optical sensing behavior, especially in absorbance-mode, of the thin films of PdO, Pd-Sn and PdO-SnO2.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alain J. Corso, Marco Angiola, Enrico Tessarolo, Martino Guidolin, Alberto Donazzan, Alessandro Martucci, and Maria G. Pelizzo "Continuous palladium-based thin films for hydrogen detection", Proc. SPIE 10231, Optical Sensors 2017, 102312B (16 May 2017); https://doi.org/10.1117/12.2266472
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Palladium

Hydrogen

Absorbance

Oxidation

Annealing

Thin films

Atomic force microscopy

Back to Top