Presentation
10 July 2018 CCD linearity measurement by incremental binning (Conference Presentation)
Author Affiliations +
Abstract
The traditional method for measuring CCD non-linearity using constant flux and variable exposure time is compared to a faster and potentially more accurate method that requires just two exposures at low intensity. Signal is varied by parallel-binning a successively greater number of lines. The binned image is compared to a conventional image with identical illumination, co-added digitally in the same pattern. This method requires no shutter calibration and is insensitive to illumination drift or charge transfer inefficiency. With some additional software effort, it can be arranged to tolerate illumination non-uniformity. We present data obtained by both methods for the 64 CD231-C6 outputs and discuss automated performance optimization. We find that the widely held assumption that non-linearity only affects high signals is incorrect when optimizing for minimum gain change over the full signal range, in which case slope increases with signal initially, then peaks in the mid-range before dropping again.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stephen Kaye, Roger Smith, Peter H. Mao, and Timothée Greffe "CCD linearity measurement by incremental binning (Conference Presentation)", Proc. SPIE 10709, High Energy, Optical, and Infrared Detectors for Astronomy VIII, 107090Z (10 July 2018); https://doi.org/10.1117/12.2314251
Advertisement
Advertisement
KEYWORDS
Charge-coupled devices

Calibration

Camera shutters

RELATED CONTENT

VIS: the visible imager for Euclid
Proceedings of SPIE (August 02 2014)
The WIYN one degree imager in 2018 an extended...
Proceedings of SPIE (July 06 2018)
Characterization and performance of PAUCam filters
Proceedings of SPIE (August 09 2016)
SARG: the high-resolution spectrograph of TNG
Proceedings of SPIE (March 21 1997)

Back to Top