Development of separation inspection technique for micro-cracks and particles using non-contact stress-induced light scattering method

Yoshitaro Sakata; Nao Terasaki

doi:10.1117/12.2508375

4 March 2019 Development of separation inspection technique for micro-cracks and particles using non-contact stress-induced light scattering method

Yoshitaro Sakata, Nao Terasaki

Author Affiliations +

Proceedings Volume 10925, Photonic Instrumentation Engineering VI; 1092519 (2019) https://doi.org/10.1117/12.2508375
Event: SPIE OPTO, 2019, San Francisco, California, United States

Abstract

Fine-polishing techniques, such as chemical mechanical polishing treatments, are important techniques in glass substrate manufacturing. However, these techniques may cause microcracks under the surface of glass substrates because they use mechanical friction. We propose a Non-contact thermal Stress-Induced LightScattering Method (N-SILSM) using a heating device for inspecting surfaces to detect polishing-induced microcracks. The N-SILSM can detect microcracks in a product under a fine-polished surface. It is a technique for exposing microcracks by exploiting the change in light-scattering from microcrack tips due to temperature variation-induced stress. Additionally, optical properties change due to temperature variations. However, at manufacturing sites, it is ideal that inspection systems be able to distinguish between microcracks and tiny particles. In this report, we carry out the selective detection of microcracks and tiny particles using a N-SILSM with temperature variation. Experimental results showed that the amount of change in the lightscattering intensity alters the cubic function regardless of the size of the microcracks, and also confirmed that tiny particles show very little change in light-scattering intensity. In addition, the possibility of microcrack size estimation was suggested from the magnitude of the change in light-scattering intensity. From the above results, it has been shown that microcracks and tiny particles can be identified and measured by a N-SILSM utilizing temperature change, and that microcrack size estimation can be based on the change in light-scattering intensity. Thus, it has been suggested that N-SILSM is a useful inspection technique for distinguishing between microcracks and tiny particles.

Citation Download Citation

Yoshitaro Sakata and Nao Terasaki "Development of separation inspection technique for micro-cracks and particles using non-contact stress-induced light scattering method", Proc. SPIE 10925, Photonic Instrumentation Engineering VI, 1092519 (4 March 2019); https://doi.org/10.1117/12.2508375

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Particles

Glasses

Temperature metrology

Inspection

Light scattering

Surface finishing

Manufacturing

Show All Keywords

Keywords/Phrases

Search In:

Publication Years