Paper
1 August 1990 Properties of dc-magnetron-sputtered NiSiOx films
Joachim Szczyrbowski, Ralf Faber
Author Affiliations +
Proceedings Volume 1272, Optical Materials Technology for Energy Efficiency and Solar Energy Conversion IX; (1990) https://doi.org/10.1117/12.20430
Event: The International Congress on Optical Science and Engineering, 1990, The Hague, Netherlands
Abstract
Transparent and durable thin films of NiSiO were prepared by reactive d.c. magnetron sputtering at room temperature. The target materials used were Si, Ni, NiSi2 and NiSi alloys with 20/80 and 40/60 wt % for nickel and silicon, respectively. With a suitable composition of Ar, N2 and 02 we were able to obtain a stable sputtering process for NiSiO-films without any arcing and flickering. The stable sputtering process formed non-absorbing layers with a deposition rate of 20 A/sec. This is approximately 2 to 3 times higher than the deposition rate for Si02 at the same deposition parameters. The optical transmission and reflection were measured in the wavelength region from 0.28 itm to 2.5 rim. The index of refraction n and the extinction coefficient k were calculated in the same range. The "theoretical" index of refraction was determined by Effective Medium Approximation (ENA).
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joachim Szczyrbowski and Ralf Faber "Properties of dc-magnetron-sputtered NiSiOx films", Proc. SPIE 1272, Optical Materials Technology for Energy Efficiency and Solar Energy Conversion IX, (1 August 1990); https://doi.org/10.1117/12.20430
Lens.org Logo
CITATIONS
Cited by 7 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sputter deposition

Silicon

Nickel

Refraction

Coating

Energy efficiency

Reflection

Back to Top