Design considerations for active constrained layer damping treatments

Eric M. Austin; Daniel J. Inman; S. C. Huang

doi:10.1117/12.240803

31 May 1996 Design considerations for active constrained layer damping treatments

Eric M. Austin, Daniel J. Inman, S. C. Huang

Author Affiliations +

Proceedings Volume 2715, Smart Structures and Materials 1996: Mathematics and Control in Smart Structures; (1996) https://doi.org/10.1117/12.240803
Event: 1996 Symposium on Smart Structures and Materials, 1996, San Diego, CA, United States

Abstract

Active constrained layer damping consists of either replacing or augmenting the constraining layer for a viscoelastic material with piezoceramic actuators in an attempt to improve vibration suppression properties by synergism between passive and active damping techniques. An important question in such configurations is whether the reduction in actuation ability of the piezoceramic on the beam due to a relatively soft viscoelastic layer is compensated for by enhanced passive damping due to increased shear in the viscoelastic material. Some tradeoffs between pure passive, pure active control, and active constrained layer damping are discussed here. Velocity feedback and LQR are investigated. Several authors have researched and developed formulations for active constrained layer damping techniques. The approach presented here differs from most in that it employs an energy principle for the equations of a beam with partial active/passive constrained layer damping transients. An offshoot of this is the thickness of the viscoelastic layer can be arbitrarily small (even zero), thus opening up the possibility of simulating the realistic design problem where the optimal sizing, length, and thickness of a treatment is subject to a total thickness restriction. The results show that the active constrained layer damping treatment provides better vibration suppression than passive damping treatments, and it even out performs pure active control for low-gain applications.

Citation Download Citation

Eric M. Austin, Daniel J. Inman, and S. C. Huang "Design considerations for active constrained layer damping treatments", Proc. SPIE 2715, Smart Structures and Materials 1996: Mathematics and Control in Smart Structures, (31 May 1996); https://doi.org/10.1117/12.240803

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE