Paper
9 December 1999 Simultaneous, remote, and interferometric measurement of thickness and group refractive index
Dominic F. Murphy, Donal A. Flavin
Author Affiliations +
Abstract
A low-coherence optical fiber interferometric technique for simultaneous measurement of geometric thickness and group refractive index of highly dispersive materials is described. The technique, immune to the dispersion-induced asymmetry of the low-coherence interferograms obtained, overcomes some of the drawbacks associated with recently reported low-coherence approaches to this simultaneous measurement. The technique uses the experimental configuration of a tandem interferometer with the samples to be characterized placed in an air-gap in one arm of the measurement interferometer. Dispersion- insensitive measurements of the group delay imbalances in the measurement interferometer are made using dispersive Fourier transform spectrometry (DFTS). Sample thickness and group refractive index are calculated from these group delays which are unambiguously determined from the optical frequency dependence of the measured phases of the interferograms. Thickness measurements accurate to within 1 micrometer and group index measurements accurate to within one part per thousand have been achieved for BK7 and fused-silica glass samples in the thickness range 2000 to 6000 micrometers.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dominic F. Murphy and Donal A. Flavin "Simultaneous, remote, and interferometric measurement of thickness and group refractive index", Proc. SPIE 3860, Fiber Optic Sensor Technology and Applications, (9 December 1999); https://doi.org/10.1117/12.372947
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometers

Refractive index

Tungsten

Interferometry

Phase measurement

Fourier transforms

Mirrors

Back to Top