Paper
21 July 2000 Comparison of substrate curvature and resonant frequency thin film stress mapping techniques
Michael P. Schlax, Roxann L. Engelstad, Edward G. Lovell, Cameron J. Brooks, Christopher Magg
Author Affiliations +
Abstract
A crosscutting issue for Next Generation Lithographies is the ability to monitor and control the uniformity of thin film stresses. Because the global stress fields of thin film layers can introduce distortions in lithographic masks, it is essential that the characteristics of these stress fields be understood and controlled, in order to achieve the high resolution and positioning accuracy required. This paper provides a comparison between resonant frequency and substrate curvature stress mapping techniques. Experiments have been performed using the UW-CMC Rack RFT device and the commercially available Tencor FLX 5510. Measurements across two IBM diagnostic masks identify the magnitude and uniformity of as-deposited SiON film stress. An analysis of the accuracy and limitations of the experimental methods is discussed.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael P. Schlax, Roxann L. Engelstad, Edward G. Lovell, Cameron J. Brooks, and Christopher Magg "Comparison of substrate curvature and resonant frequency thin film stress mapping techniques", Proc. SPIE 3997, Emerging Lithographic Technologies IV, (21 July 2000); https://doi.org/10.1117/12.390093
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diagnostics

Photomasks

Composites

Thin films

Semiconducting wafers

Silicon carbide

Etching

Back to Top