Paper
5 July 2000 New pattern generation system based on i-line stepper: photomask repeater
Author Affiliations +
Abstract
New pattern generation system, Photomask Repeater, based on i-line stepper has been developed. This system can transfer device patterns from master masks onto a photomask plate with 22mm field size. To print a chip larger than the 22mm field, stitching technology has been developed. Critical dimension error in the region where shots are stitched is the key issue of this technology. Quantification of critical dimension deviation induced by shot misplacement was carried out by calculation. Introducing exposure dose gradation, it was reduced less than 1.5nm. Form measurements of real exposed mask this technique proved to be able to stitch shots seamlessly. Major two specifications, pattern placement accuracy and critical dimension uniformity, were evaluated. Both specifications required for 150nm photomask were fully satisfied. Availability of the photomask repeater to memory device and system on chip is discussed.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Suigen Kyoh, Soichi Inoue, Iwao Higashikawa, Ichiro Mori, Katsuya Okumura, Nobuyuki Irie, Koji Muramatsu, and Nobutaka Magome "New pattern generation system based on i-line stepper: photomask repeater", Proc. SPIE 4000, Optical Microlithography XIII, (5 July 2000); https://doi.org/10.1117/12.389056
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Critical dimension metrology

System on a chip

Kinematics

Lithography

Semiconducting wafers

Optical components

RELATED CONTENT

SAQP and EUV block patterning of BEOL metal layers on...
Proceedings of SPIE (March 24 2017)
CD-measurement technique for hole patterns on stencil mask
Proceedings of SPIE (December 06 2004)
Lithographic alternatives to PSM repair
Proceedings of SPIE (June 01 1992)
Reticle quality needs for advanced 193-nm lithography
Proceedings of SPIE (September 05 2001)

Back to Top