Paper
7 September 2001 Conformal optics risk reduction demonstration
David J. Knapp, James P. Mills, Ronald G. Hegg, Patrick A. Trotta, Christopher B. Smith
Author Affiliations +
Abstract
For the past three years, the Precision Conformal Optics Consortium has been developing a revolutionary new class of optics. These optics are characterized by outer window elements that conform to aerodynamic rather than optical requirements. Conformal optical elements can greatly improve the aerodynamic performance of the host platform. To make conformal optics a reality, challenges had to be overcome in design, fabrication, and testing. This was accomplished in October 1999 when Raytheon demonstrated the world's first conformal optical system. This fineness ratio one system was a risk reduction effort to develop technology for later systems. It is comprised of a calcium fluoride conformal optical dome, a TI-1173 aspheric corrector, and a calcium fluoride solid catadioptric telescope. The design involved overcoming large amounts of aberration that varied with gimbal look angle. Efforts also included aligning the system to tight tolerances and testing highly aspheric optical elements. Overall, the actual system performance compared very favorably with the design model. With the proven success of this risk reduction demonstration, the path was cleared for new higher performance conformal optical systems.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David J. Knapp, James P. Mills, Ronald G. Hegg, Patrick A. Trotta, and Christopher B. Smith "Conformal optics risk reduction demonstration", Proc. SPIE 4375, Window and Dome Technologies and Materials VII, (7 September 2001); https://doi.org/10.1117/12.439170
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical components

Optical fabrication

Aerodynamics

Aspheric lenses

Optics manufacturing

Solids

Domes

RELATED CONTENT

Fundamentals of conformal dome design
Proceedings of SPIE (December 23 2002)
Summarize of conformal optics
Proceedings of SPIE (March 12 2008)
Overview of conformal optics
Proceedings of SPIE (July 26 1999)
High speed lapping hyperboloid by means of a lapping tool...
Proceedings of SPIE (November 14 2007)

Back to Top