Evaluation of alignment marks using ASML ATHENA alignment system in 90-nm BEOL process

Chin-Boon Tan; Swee-Hock Yeo; Hui Peng Koh; Chee Kiong Koo; Yee Mei Foong; Yong Kong Siew

doi:10.1117/12.487734

2 June 2003 Evaluation of alignment marks using ASML ATHENA alignment system in 90-nm BEOL process

Chin-Boon Tan, Swee-Hock Yeo, Hui Peng Koh, Chee Kiong Koo, Yee Mei Foong, Yong Kong Siew

Proceedings Volume 5038, Metrology, Inspection, and Process Control for Microlithography XVII; (2003) https://doi.org/10.1117/12.487734
Event: Microlithography 2003, 2003, Santa Clara, California, United States

Abstract

As the critical dimension (CD) in integrated circuit (IC) device reduces, the total overlay budget needs to be more stringent. Typically, the allowable overlay error is 1/3 of the CD in the IC device. In this case, robustness of alignment mark is critical, as accurate signal is required by the scanner’s alignment system to precisely align a layer of pattern to the previous layer. Alignment issue is more severe in back-end process partly due to the influenced of Chemical Mechanical Polishing (CMP), which contribute to the asymmetric or total destroy of the alignment marks. In this paper, the performance of different design of alignment marks on 0.10μm echnology wafer has been evaluated using ASML ATHENATM alignment system. For example, segmented marks with smaller dimensions in terms of width and length are used. Narrow marks are preferable due to the space constraint in the scribe lines. The width of NSPM has been shrunk down to 70% of the SPM and the length remains the same. It is a challenge to the alignment system to collect the NSPM signal and provide comparable alignment capability. The evaluations were completed using short loop wafers, which focus on back-end-of-line via and metal layers in a 90nm Cu dual damascene low k process. The results also look into the overlay performance using different alignment strategies. Offline overlay measurements were performed to verify the results.

Citation Download Citation

Chin-Boon Tan, Swee-Hock Yeo, Hui Peng Koh, Chee Kiong Koo, Yee Mei Foong, and Yong Kong Siew "Evaluation of alignment marks using ASML ATHENA alignment system in 90-nm BEOL process", Proc. SPIE 5038, Metrology, Inspection, and Process Control for Microlithography XVII, (2 June 2003); https://doi.org/10.1117/12.487734

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available