A flexible micromachined optical sensor for simultaneous measurement of pressure and shear force distribution on foot

Wei-Chih Wang; Reynold R. Panergo; Christopher M. Galvanin; William Ledoux; Bruce Sangeorzan; Per G. Reinhall

doi:10.1117/12.483932

1 August 2003 A flexible micromachined optical sensor for simultaneous measurement of pressure and shear force distribution on foot

Wei-Chih Wang, Reynold R. Panergo, Christopher M. Galvanin, William Ledoux, Bruce Sangeorzan, Per G. Reinhall

Author Affiliations +

Proceedings Volume 5047, Smart Nondestructive Evaluation and Health Monitoring of Structural and Biological Systems II; (2003) https://doi.org/10.1117/12.483932
Event: NDE for Health Monitoring and Diagnostics, 2003, San Diego, California, United States

Abstract

Lower limb complications associated with diabetes include the development of plantar ulcers that can lead to infection and subsequent amputation. While it is known from force plate analyses that there are medial/lateral and anterior/posterior shear components of the ground reaction force, there is little known about the actual distribution of this force during daily activities, nor about the role that shear plays in causing plantar ulceration. Furthermore, one critical reason why these data have not been obtained previously is the lack of a validated, widely used, commercially available shear sensor, in part because of the various technical issues associated with shear measurement. Here we have developed novel means of tranducing plantar shear and pressure stress via a new microfabricated optical system. The pressure/shear sensor consists of an array of optical waveguides lying in perpendicular rows and columns separated by elastomeric pads. A map of pressure and shear stress is constructed based on observed macro bending through the intensity attenuation from the physical deformation of two adjacent perpendicular optical waveguides. The uniqueness of the sensor is in its batch fabrication process, which involves injection molding and embossing techniques with Polydimethylsiloxane (PDMS) as the optical medium. Here we present the preliminary results of the prototype. The sensor has been shown to have low noise and responds linearly to applied loads. The smallest detectable force on each sensor element based on the current setup is ~0.1 N. The smallest area we have resolved in our mesh sensor is currently 950x950μm²

Citation Download Citation

Wei-Chih Wang, Reynold R. Panergo, Christopher M. Galvanin, William Ledoux, Bruce Sangeorzan, and Per G. Reinhall "A flexible micromachined optical sensor for simultaneous measurement of pressure and shear force distribution on foot", Proc. SPIE 5047, Smart Nondestructive Evaluation and Health Monitoring of Structural and Biological Systems II, (1 August 2003); https://doi.org/10.1117/12.483932

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available