Paper
6 May 2004 Inverse method for estimating elastic modulus of arterial walls
Author Affiliations +
Abstract
Pulse wave velocity (PWV) is widely used for estimating the stiffness of an artery. It is well known that a stiffened artery can be associated with various diseases and with aging and disease. Usually, PWV is measured using the “foot-to-foot” method. The “foot” of the pressure wave is not clear due to reflected waves and blood noise. Also, PWV is an average indicator of artery stiffness between the two measuring points, and therefore does not identify local stiffness variations. We propose producing a flexural wave in the arterial wall using low frequency localized ultrasound radiation force and measuring the wave velocity along the arterial wall. The wave velocity can be measured accurately over a few millimeters. A mathematical model for wave propagation along the artery is developed with which the Young’s modulus of the artery can be determined from measured wave velocities. Experiments were conducted on a pig carotid artery in gelatin. The wave velocity was measured by the phase change at a known distance for a given frequency. The measured wave velocity is about 3 m/s at 100 Hz and 6.5 m/s at 500 Hz. The real part of complex elastic modulus of the artery is estimated to be 300 kPa.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaoming Zhang, Mostafa Fatemi, and James F. Greenleaf "Inverse method for estimating elastic modulus of arterial walls", Proc. SPIE 5368, Medical Imaging 2004: Physics of Medical Imaging, (6 May 2004); https://doi.org/10.1117/12.532760
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Arteries

Velocity measurements

Wave propagation

Ultrasonography

Distance measurement

Phase measurement

Mathematical modeling

Back to Top