Paper
2 August 2004 Optical test using wedge plate phase-shifting lateral-shearing interferometer
Author Affiliations +
Abstract
In order to test aspheric optical elements, wedge plate lateral shearing interferometer is used. In a wedge plate the thickness varies along the wedge direction. Because of this thickness varying characteristic, the optical path difference between the original wavefront and the sheared wavefront in wedge plate lateral shearing interferometer is changed according to the incident position of the ray. Simply moving the wedge plate in-parallel to the wedge direction gives the phase shift quantity required for phase shifting interferometry. In typical phase shifting methods, piezoelectric transducer(PZT) is mainly used to give phase shifting quantity. But this method requires only one additional linear translator to move the wedge plate. The required moving distance for the phase shift of wavefront in this method is an order of millimeter, whereas the typical moving distance in the other method using a piezoelectric transducer is an order of wavelength. This method has an advantage in the moving distance precision compared with the other methods. Using this wedge plate lateral shearing interferometer, optical wavefront is measured and reconstructed.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jae Bong Song, Yun Woo Lee, and In Won Lee "Optical test using wedge plate phase-shifting lateral-shearing interferometer", Proc. SPIE 5531, Interferometry XII: Techniques and Analysis, (2 August 2004); https://doi.org/10.1117/12.559282
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Phase shifts

Wavefronts

Optical testing

Phase shifting

Interferometers

Shearing interferometers

Aspheric lenses

Back to Top