Paper
28 February 2005 Effects of design geometry on SU8 polymer waveguides
Anthony Stephen Holland, Vishal Shenoy Balkunje, Arnan Mitchell, Michael William Austin, Mukund K. Raghunathan, Gorgi Kostovski
Author Affiliations +
Proceedings Volume 5649, Smart Structures, Devices, and Systems II; (2005) https://doi.org/10.1117/12.582267
Event: Smart Materials, Nano-, and Micro-Smart Systems, 2004, Sydney, Australia
Abstract
The spin-on photoresist SU8 from MicroChem has a relatively high refractive index (n=1.57 at 1550nm) compared with other polymers. It is stable and has high optical transmission at optical communication wavelengths. In this paper we study rib waveguides fabricated using SU8 as the core layer and thermoset polymers UV15 (n=1.50 at 1550nm) from Master Bond and NOA61 (n=1.54 at 1550nm) from Gentec as the cladding layers. The rib height is varied from 0.3 to 1.7μm high. This is part of the SU8 layer sandwiched between the cladding layers. The waveguides are tested to determine the effects of varying this geometry for single mode optical transmission. The lengths of the waveguides were 1.5 cm to 5 cm.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anthony Stephen Holland, Vishal Shenoy Balkunje, Arnan Mitchell, Michael William Austin, Mukund K. Raghunathan, and Gorgi Kostovski "Effects of design geometry on SU8 polymer waveguides", Proc. SPIE 5649, Smart Structures, Devices, and Systems II, (28 February 2005); https://doi.org/10.1117/12.582267
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Polymers

Cladding

Photoresist materials

Polymer multimode waveguides

Etching

Refractive index

Back to Top