Paper
4 May 2005 Pattern collapse and line width roughness reduction by surface conditioner solutions for 248-nm lithography
Peng Zhang, Madhukar B. Rao, Manuel Jaramillo Jr., Bridget Horvath, Brenda Ross, Ted Paxton, Todd Davis, Pat Cook, David Witko
Author Affiliations +
Abstract
In this paper, surface conditioners were applied during the post-develop process to extend the capability of 248nm lithography processing below the k1= 0.30 threshold. The interaction between surface conditioner and photoresist was found to be a critical parameter in affecting pattern collapse, line width roughness (LWR), and process latitude. Tailoring the surface interaction properties required balancing between surface conditioners that had weak interactions that improved pattern collapse only marginally, to surface conditions with strong interactions that produced a considerable reduction in LWR but provided no benefit to pattern collapse or process latitude when compared to DI water. The surface conditioners with optimized resist interactions provided significant improvement in all performance parameters including reduced pattern collapse, improved LWR, and enlarged usable process latitude.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peng Zhang, Madhukar B. Rao, Manuel Jaramillo Jr., Bridget Horvath, Brenda Ross, Ted Paxton, Todd Davis, Pat Cook, and David Witko "Pattern collapse and line width roughness reduction by surface conditioner solutions for 248-nm lithography", Proc. SPIE 5753, Advances in Resist Technology and Processing XXII, (4 May 2005); https://doi.org/10.1117/12.600066
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Line width roughness

Lithography

Critical dimension metrology

Photoresist materials

Photoresist processing

Water

Back to Top