Paper
18 May 2006 Contact-probe-based excitation method for mine detection: application on a VS1.6 Italian landmine
Steven S. Bishop, John A. Judge, Joseph F. Vignola, Christopher M. Smith, Tung-Huei Chen, Panagiotis Tsolpelas
Author Affiliations +
Abstract
Probe force and ground surface velocity measurements are obtained using laser Doppler vibrometry for one specific excitation contact point on the casing of the VS1.6 Antitank landmine for surface laid and buried scenarios. Probe contact force and ground velocity measurements were taken over a 1 KHz bandwidth (0 Hz to 1 KHz). Combined velocity magnitude and phase images are provided as laboratory results. The proposed excitation technique has the potential for significantly greater signal bandwidth and amplitude compared to remote acoustic and seismic excitation strategies.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Steven S. Bishop, John A. Judge, Joseph F. Vignola, Christopher M. Smith, Tung-Huei Chen, and Panagiotis Tsolpelas "Contact-probe-based excitation method for mine detection: application on a VS1.6 Italian landmine", Proc. SPIE 6217, Detection and Remediation Technologies for Mines and Minelike Targets XI, 62171A (18 May 2006); https://doi.org/10.1117/12.672916
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Land mines

Mining

Doppler effect

Velocity measurements

Acoustics

Sensors

Phase velocity

Back to Top