Paper
13 October 2006 Computer simulation and model test research on strength test of hydraulic support
Hongyu Liu, Xun Fan
Author Affiliations +
Proceedings Volume 6280, Third International Symposium on Precision Mechanical Measurements; 62803W (2006) https://doi.org/10.1117/12.716365
Event: Third International Symposium on Precision Mechanical Measurements, 2006, Urumqi, China
Abstract
This paper took ZT6500/19.5/34 hydraulic support as an example, made a solid model construction on its prototype and 1 to 5 model by SolidWorks software, proceeded a computer simulation analysis on simplified support prototype and its model with the status of concentration load on central section of support top beam by ANSYS software, drew relevant total displacement figure and equivalent stress figure, found out relevant distribution rule. Based on the similarity theory, static similarity rule and static similarity condition of hydraulic support model test were constructed, hydraulic support model test board and its hydraulic control system, data collecting and processing system were constructed. According to the national standard, strength test was made on support model with the status of concentration load on central section of support top beam. The research shows that computer simulation results are consistent with actual model test results, which verifies the accuracy of computer simulation results. The method of combining computer simulation test with hydraulic support model test has the advantage of less test cost, short exploitation period, accurate and comprehensive analysis, which enhances the level of entire design, calculation and test and provides an effective way of systematically theoretical and experimental study on hydraulic support.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hongyu Liu and Xun Fan "Computer simulation and model test research on strength test of hydraulic support", Proc. SPIE 6280, Third International Symposium on Precision Mechanical Measurements, 62803W (13 October 2006); https://doi.org/10.1117/12.716365
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Data modeling

Computer simulations

Prototyping

Control systems

Data processing

Instrument modeling

Analytical research

Back to Top