Paper
21 February 2007 High-peak-power pulse amplification using Yb-doped double-clad fiber
Ryusuke Horiuchi, Hiroaki Sunaga, Kazuyoku Tei, Shigeru Yamaguchi, Kenzo Nanri, Tomoo Fujioka
Author Affiliations +
Abstract
A high peak-power, high repetition rate Master Oscillator Power Amplifier (MOPA) system incorporating an Yb-doped fiber amplifier and its second harmonic generation were investigated in detail. The oscillator is actively Q-switch microchip laser at repetition rate of 50 kHz with a pulse width of 2.8ns. The amplifier employing Yb-doped polarization maintaining fiber, having a large mode area was exited by a laser diode with an optical power of 17W. As results, the amplified average output power of 10W and the optical conversion efficiency of 59% were achieved. In this MOPA system, second harmonic generation (SHG) experiments were performed using KTP and LBO crystals. The conversion efficiency of 21% and 40%, the maximum SHG power of 0.92 W and 3.3W were obtained for KTP crystal and LBO crystal respectively.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ryusuke Horiuchi, Hiroaki Sunaga, Kazuyoku Tei, Shigeru Yamaguchi, Kenzo Nanri, and Tomoo Fujioka "High-peak-power pulse amplification using Yb-doped double-clad fiber", Proc. SPIE 6453, Fiber Lasers IV: Technology, Systems, and Applications, 645325 (21 February 2007); https://doi.org/10.1117/12.702639
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Second-harmonic generation

Ferroelectric materials

Fiber amplifiers

Harmonic generation

Oscillators

Scanning probe microscopy

RELATED CONTENT


Back to Top