Paper
10 April 2007 On the measurement of recovery strains of thermo-mechanically cycled Ni-Ti memory alloy
Krzysztof Kus, Piotr Chwiedziewicz
Author Affiliations +
Proceedings Volume 6597, Nanodesign, Technology, and Computer Simulations; 659712 (2007) https://doi.org/10.1117/12.726766
Event: Nanodesign, Technology, and Computer Simulations, 2006, Olsztyn, Poland
Abstract
This paper includes an experimental study of strains variation (recovery and permanent strains) in a Ni-Ti alloy due to thermo-mechanical cycling. The shape memory effect (SME) was evaluated in strip-shaped specimens using a special bending apparatus and discussed with respect to different thermo-mechanical loading paths. The definite transformation temperatures of the studied alloy were achieved by applying several heat-treatments at various temperatures and for different times, and observing the phase transformation behaviour using DSC analysis. To identify the phases present after annealing the specimens were subjected to XRD measurements. It was found that the nature of transformation cycle during the two applied thermo-mechanical loading paths (especially a stress during reverse transformation) and the changes developed in microstructure of the cycled material can both affect the strains behaviour.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Krzysztof Kus and Piotr Chwiedziewicz "On the measurement of recovery strains of thermo-mechanically cycled Ni-Ti memory alloy", Proc. SPIE 6597, Nanodesign, Technology, and Computer Simulations, 659712 (10 April 2007); https://doi.org/10.1117/12.726766
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Shape memory alloys

Heat treatments

Annealing

Logic

X-ray diffraction

Autoregressive models

Chemical analysis

Back to Top