Improvement of etching selectivity for 32-nm node mask making

C. L. Lu; L. Y. Hsia; T. H. Cheng; S. C. Chang; W. C. Wang; H. J. Lee; Y. C. Ku

doi:10.1117/12.728928

11 May 2007 Improvement of etching selectivity for 32-nm node mask making

C. L. Lu, L. Y. Hsia, T. H. Cheng, S. C. Chang, W. C. Wang, H. J. Lee, Y. C. Ku

Proceedings Volume 6607, Photomask and Next-Generation Lithography Mask Technology XIV; 66070E (2007) https://doi.org/10.1117/12.728928
Event: Photomask and Next-Generation Lithography Mask Technology XIV, 2007, Yokohama, Japan

Abstract

As the geometry of semiconductor devices continue to scale down, high-NA imaging will be used to enhance the resolution. Sub-resolution assistant features are used to gain depth of focus at the wafer. One of the challenges in patterning small assistant features during mask fabricating is resist collapse. Reducing resist thickness is one of the solutions. This necessitates an increase in the selectivity of chromium (Cr) to photo-resist (PR). The selectivity determines the PR remaining on the mask after Cr etching. Insufficient remaining PR will induce pinhole-type clear defect and poor line edge roughness (LER). In this paper, the Cr-to-PR selectivity was studied under induced couple plasma (ICP) and quasi-remote plasma environment. PR remaining, etching bias, and critical dimension uniformity (CDU) are the main subjects for evaluation. To understand the etching behavior for higher selectivity, design of experiment (DOE) L4 by Taguchi method is used to find the dominating factors. By adopting the optimized etching recipe, the resist can be thinned down to effectively improve its collapse margin, especially for smaller assistant features. The results show that 72-nm assistant features on mask can be patterned for early 32-nm node development. This paper also suggests several approaches that can be used to reduce the required resist thickness, such as hard-mask, film thickness reduction, and etcher hardware modification.

Citation Download Citation

C. L. Lu, L. Y. Hsia, T. H. Cheng, S. C. Chang, W. C. Wang, H. J. Lee, and Y. C. Ku "Improvement of etching selectivity for 32-nm node mask making", Proc. SPIE 6607, Photomask and Next-Generation Lithography Mask Technology XIV, 66070E (11 May 2007); https://doi.org/10.1117/12.728928

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available