Bimetallic thermal resists potential for double-exposure immersion lithography and grayscale photomasks

James M. Dykes; Calin Plesa; Chinheng Choo; Glenn H. Chapman

doi:10.1117/12.746990

1 November 2007 Bimetallic thermal resists potential for double-exposure immersion lithography and grayscale photomasks

James M. Dykes, Calin Plesa, Chinheng Choo, Glenn H. Chapman

Proceedings Volume 6730, Photomask Technology 2007; 673040 (2007) https://doi.org/10.1117/12.746990
Event: SPIE Photomask Technology, 2007, Monterey, California, United States

Abstract

Double exposure/patterning is considered the best candidate for extending 195nm optical lithography below 40nm resolution. However, double exposure techniques require a resist where the exposures do not add linearly to produce the final result. A class of negative thermal resists that show this effect are bimetallic thin-films consisting of Bi/In or Sn/In. The films are bi-layered structured until sufficiently heated by a laser exposure pulse (7 mJ/sq. cm for 4 nsec). Experiments with interference lithography at 266nm in air demonstrated that Bi/In resists have a resolution limit <42nm, the exposure system limit. As a first investigation into the resist's potential for immersion lithography, the response of bimetallic resists to immersion lithography was examined. The Sn/In film used demonstrated successful development as thermal resist for immersion exposures and the power level required to convert the film was only slightly higher than the level required for exposing the film in air. Bimetallic films have demonstrated transmittances <0.1% when unexposed and >60% when highly exposed to an Argon laser, enabling their application as grayscale photomasks. However, direct laser-writing of the photomasks causes fine variations in their transparency due to the laser beam's Gaussian power profile. To correct this problem, a beam-shaping mask was designed to manipulate the power profile of the laser. To help measure mask transparency at a resolution suitable for characterizing a photomask, two photodiode sensors were added to the writing system. The profiling ability offered by the modified system allows the use of test structures 100x smaller then previously required.

Citation Download Citation

James M. Dykes, Calin Plesa, Chinheng Choo, and Glenn H. Chapman "Bimetallic thermal resists potential for double-exposure immersion lithography and grayscale photomasks", Proc. SPIE 6730, Photomask Technology 2007, 673040 (1 November 2007); https://doi.org/10.1117/12.746990

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available