Paper
28 November 2007 A novel highly integrated light guide plate using micro optical technique
Ping Xu, Xiangxian Chen, Jiefeng Huang, Xulin Zhang, Lili Wan, Kai Wang, Jiayong Liu
Author Affiliations +
Abstract
An integrated light guide plate(LGP) using micro optical technique is presented in this paper. Micro-prisms are fused on the bottom surface which replace the plane reflective film at presented. By changing the bottom angles of micro-prisms, the relationship between the bottom angle and the direction of peak luminance is analyzed systematically. When the direction of peak luminance is concentrated on vertical angle(90°), the vertical direction luminance of LGP without structure on the top surface is already closed to the 3M backlight module. while in the LGP which fused the micro tapers with tiny concave on the top surface, the illuminance and the vertical direction luminance is about 2.28 times and 1.09 times compared to the 3M backlight module respectively. The result shows that the novel integrated micro optical LGP can substitute for 3M crossed prism films and accorded with the tendency of integration ,frivolity and high brightness in backlight system.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ping Xu, Xiangxian Chen, Jiefeng Huang, Xulin Zhang, Lili Wan, Kai Wang, and Jiayong Liu "A novel highly integrated light guide plate using micro optical technique", Proc. SPIE 6834, Optical Design and Testing III, 683409 (28 November 2007); https://doi.org/10.1117/12.756160
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Prisms

Waveguides

Integrated optics

Micro optics

Reflectivity

Analytical research

Data modeling

Back to Top