Paper
11 March 2008 Influence of annealing temperature on microstructures and resistivity of FexAl1-x films
Shuichang Yang, Zhijun Liao, Zhenliang Liu, Weidong Wu, Dengxue Wu, Tiecheng Lu, Lin Zhang, Yongjian Tang
Author Affiliations +
Proceedings Volume 6984, Sixth International Conference on Thin Film Physics and Applications; 69842A (2008) https://doi.org/10.1117/12.792025
Event: Sixth International Conference on Thin Film Physics and Applications, 2007, Shanghai, China
Abstract
In this paper, FeXAl1-X films have been deposited on silicon substrates using electron beam evaporation, which have been not reported to prepare FeXAl1-X films before. Subsequently, the films were annealed in vacuum better than 3×10-4Pa for 1 hour at 100°C, 280°C, 330°C, 450°C and 500°C, respectively. Electrical resistivities of the samples were been measured by four point probe, and microstructures of the samples were characterized by X-ray diffraction(XRD). The results show that, the resistivity of films reduces gradually with increasing of the annealing temperature, and the structure of films can be improved after annealing. In addition, the resistivity of film reduces gradually with increasing thickness and comes closed to the that of bulk when the film thickness becomes thicker than 100nm.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shuichang Yang, Zhijun Liao, Zhenliang Liu, Weidong Wu, Dengxue Wu, Tiecheng Lu, Lin Zhang, and Yongjian Tang "Influence of annealing temperature on microstructures and resistivity of FexAl1-x films", Proc. SPIE 6984, Sixth International Conference on Thin Film Physics and Applications, 69842A (11 March 2008); https://doi.org/10.1117/12.792025
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Annealing

Thin films

Electron beams

Silicon films

Physics

Temperature metrology

Crystals

RELATED CONTENT


Back to Top