Paper
19 February 2009 200W average power 1mJ pulse energy from spectrally combined pulsed sub-5 ns fiber laser source
Author Affiliations +
Abstract
In this contribution, we report on spectral combination of four sub-5ns pulsed fiber amplifier systems with an average output power of 200W at 200kHz repetition rate resulting in 1mJ of pulse energy. A dielectric reflection grating is used to combine four individual beams to one output possessing a measured M2 value of 1.3 and 1.8, respectively, independent of power level. Extraction of higher pulse energies and peak powers will be discussed.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
O. Schmidt, B. Ortac, J. Limpert, A. Tünnermann, and Thomas V. Andersen "200W average power 1mJ pulse energy from spectrally combined pulsed sub-5 ns fiber laser source", Proc. SPIE 7195, Fiber Lasers VI: Technology, Systems, and Applications, 719519 (19 February 2009); https://doi.org/10.1117/12.811853
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber amplifiers

Fiber lasers

Dielectrics

Analog electronics

Dielectric polarization

Diodes

Optical amplifiers

RELATED CONTENT

50W, 1.5um, 8 WDM (25nm) channels PPM downlink Tx for...
Proceedings of SPIE (March 02 2020)
An all fiber PM MOPA pumped high power OPO at...
Proceedings of SPIE (February 15 2012)
Pulsed Tm-doped fiber lasers for mid-IR frequency conversion
Proceedings of SPIE (February 19 2009)
Erbium-doped fiber amplifiers
Proceedings of SPIE (February 01 1992)
Generation of fiber tunable high-power picosecond laser pulse
Proceedings of SPIE (February 10 2009)

Back to Top