Paper
1 April 2010 Detection of photo resist residue on advanced gate layers using optical scattering and advanced analysis techniques
Scott Ku, Ying-Hsueh Chang Chien, C. M. Yang, Elvis Wang, Damian Chen, Chris Young, Kevin Sun, Jack Yan, Prasanna Dighe, Avinash Saldanha, David Feiler
Author Affiliations +
Abstract
Detection of resist residue and organic contamination after photo resist strip and wafer clean early in the high K/metal gate (HK/MG) manufacturing process flow is critical as it has been known to significantly impact yield. This residue, when exposed to subsequent thermal process steps, transforms into solid hard spot(s), and can then be detected by a wafer inspection tool, but unfortunately it is too late to take corrective action. A unique process control solution to detect the presence of residues was developed using advanced analysis of an optical scattering inspection of a litho checkerboard pattern. The presence of residue was then validated with film thickness measurements.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Scott Ku, Ying-Hsueh Chang Chien, C. M. Yang, Elvis Wang, Damian Chen, Chris Young, Kevin Sun, Jack Yan, Prasanna Dighe, Avinash Saldanha, and David Feiler "Detection of photo resist residue on advanced gate layers using optical scattering and advanced analysis techniques", Proc. SPIE 7638, Metrology, Inspection, and Process Control for Microlithography XXIV, 76383F (1 April 2010); https://doi.org/10.1117/12.847797
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconducting wafers

Luminescence

Air contamination

Scattering

Wafer-level optics

Process control

Metrology

Back to Top