Paper
3 May 2010 QWIP responsivity prediction using the transfer matrix method
Ricardo A. Tavares Santos, Fábio Durante P. Alves
Author Affiliations +
Abstract
This paper presents a method to predict the responsivity of quantum well infrared photodetectors based in interband and intersubband transitions. The transfer matrix method (TMM) is used in a self consistent loop to calculate initial and final states as well as their respective wavefunctions, allowing the estimation of the absorption coefficient along the entire detection range. The transmission coefficient (tunneling factor) is also computed using the TMM. The spectral response is compared with measurements of AlGaAs/GaAs/InGaAs QWIPs sensitive to NIR, MWIR and LWIR, showing a good match for peak wavelength and a reasonable back-of-the-envelope result for the overall response. The results indicate that the technique has a great potential to be further improved and used in QWIP design.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ricardo A. Tavares Santos and Fábio Durante P. Alves "QWIP responsivity prediction using the transfer matrix method", Proc. SPIE 7660, Infrared Technology and Applications XXXVI, 76603M (3 May 2010); https://doi.org/10.1117/12.850602
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Quantum well infrared photodetectors

Quantum wells

Electrons

Gallium arsenide

Sensors

Silicon

Absorption

RELATED CONTENT

InP based QWIPs for long and mid wavelength band...
Proceedings of SPIE (January 23 2003)
III-V infrared research at the Jet Propulsion Laboratory
Proceedings of SPIE (August 27 2009)
Whither P-type GaAs/AlGaAs QWIP?
Proceedings of SPIE (May 21 2002)
MWIR quantum well infrared photodetectors
Proceedings of SPIE (July 26 1999)

Back to Top