Paper
15 April 2011 A nondestructive experimental study on damage progression in woven glass-epoxy composites
Patrick Pollock, Lingyu Yu, Siming Guo, Michael Sutton
Author Affiliations +
Abstract
The purpose of this study is to develop a better understanding of the damage progression in composite materials undergoing tension loading, while pushing the boundaries on measurements to identify material damage. Several SHM methods are used to detect the types of damage that are observed in each test. A Digital Image Correlation system is used to measure the surface strain throughout the test and also the residual strain after each loading cycle. The residual strain is used as an indicator for the presence of damage in the structure. Piezoelectric wafer active sensors (PWAS) are bonded to the composite material and are used to detect damage using Electromechanical Impedance Spectroscopy (EMIS). The EMIS method analyzes the changes in the structural resonances and anti-resonances. The Electrochemical Impedance Spectroscopy (ECIS) method is also used to detect damage. This method uses the impedance of the structure to determine the state of the structure. As the damage progresses in the composite, the impedance across the thickness will change.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Patrick Pollock, Lingyu Yu, Siming Guo, and Michael Sutton "A nondestructive experimental study on damage progression in woven glass-epoxy composites", Proc. SPIE 7981, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2011, 79813M (15 April 2011); https://doi.org/10.1117/12.882142
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Composites

Electromagnetic coupling

Digital image correlation

Sensors

Structural health monitoring

Dielectric spectroscopy

Active sensors

Back to Top