Paper
21 September 2011 Fabrication of bilayer wire grid polarizer using replicated polymer nano grating
Yunah Han, Jwasun Kim, Euihyeon Byeon, Seok-Min Kim, Yong-ho Lee, Chang Kwon Hwangbo
Author Affiliations +
Abstract
A bilayer wire grid polarizer composed of UV-replicated nanograting and deposited aluminum layer was designed, fabricated and evaluated for a simpler and less costly reflective polarizer. An electroformed nickel stamp was fabricated using a lithographed photo resist master pattern having a nanograting with a pitch of 80 nm, a line width of 50 nm, and a height of grating of 100 nm. A polymer grating was fabricated by the UV replication process and an aluminum layer with a thickness of 50 nm was deposited by electron-beam evaporation. To examine the performance of the fabricated bilayer wire-grid polarizer, the transmission spectra of TM- and TE-polarized light, and the extinction ratio spectra were measured and compared with the simulated values obtained from the rigorous coupled wave analysis. The measured TMtransmittance and extinction ratio of the fabricated bilayer wire grid polarizer were ~ 40 % and ~ 103 in whole visible ranges, respectively.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yunah Han, Jwasun Kim, Euihyeon Byeon, Seok-Min Kim, Yong-ho Lee, and Chang Kwon Hwangbo "Fabrication of bilayer wire grid polarizer using replicated polymer nano grating", Proc. SPIE 8169, Optical Fabrication, Testing, and Metrology IV, 81690H (21 September 2011); https://doi.org/10.1117/12.896756
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarizers

Aluminum

LCDs

Polymers

Nickel

Scanning electron microscopy

Polarization

RELATED CONTENT


Back to Top