Paper
8 September 2011 Dim moving target detection method based on time-frequency analysis
Zhengzhou Li, Lei Tian, Wei Zheng, Yuehua Zhang, Gang Jin
Author Affiliations +
Abstract
The signal-to-clutter ratio couldn't be improved effectively for conventional spatial or temporal high-pass filter is difficult to remove clutter, especially clutter edge, and a dim moving target detection method based on the timefrequency characters difference among target, noise and clutter is presented in this paper. Theoretical analysis shows that the waveform at the target location in time-frequency domain is a small wave packet, the magnitude of the wave packet is consistent with the target amplitude, and the width of the packet is inversely proportional to target speed; the waveform at clutter edge is an "uphill" or "downhill". This target detection method takes two-stage filters to detect dim target. At first, a threshold based on false alarm ratio criteria in the time-frequency is adopted to remove noise, and then the ratio between "main lobe" and "side lobe" in the wave packet is counted to remove clutter and detect target. The dim target detection experiment under cloud is included and the result shows that the method is effective.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhengzhou Li, Lei Tian, Wei Zheng, Yuehua Zhang, and Gang Jin "Dim moving target detection method based on time-frequency analysis", Proc. SPIE 8193, International Symposium on Photoelectronic Detection and Imaging 2011: Advances in Infrared Imaging and Applications, 81931J (8 September 2011); https://doi.org/10.1117/12.900132
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Target detection

Time-frequency analysis

Clouds

Signal to noise ratio

Fourier transforms

Submerged target detection

Linear filtering

RELATED CONTENT


Back to Top