Paper
31 January 2012 Micro flow cytometer with 3D hydrodynamic focusing
Author Affiliations +
Abstract
This paper reports a micro flow cytometer fabricated in Polymethylmethacrylate (PMMA) in which a 3d hydrodynamic flow focusing is employed in order to align the particles in a single line along the focused stream. The device has been fabricated by direct micro milling of two parts of PMMA that were finally bonded together. With a suitable choice of the fluidic channel geometry, a circular sample stream located in the center of the channel is obtained. Numerical simulations have been performed in order to investigate the flow characteristic of the structure and find the desiderated geometry. Three dimensional hydrofocusing of the sample fluid was analysed and demonstrated by cross sectional fluorescence imaging in good agreement with numerical simulations. Flow cytometry measurements have been performed by using 10μm particles. From the analysis of the fluorescence signals collected at each transit event we can confirm that the device was capable of creating a single-file particle stream. The results show that the device was capable of discriminating single microparticles with a good signal-to-noise ratio and a high throughput.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Genni Testa and Romeo Bernini "Micro flow cytometer with 3D hydrodynamic focusing", Proc. SPIE 8212, Frontiers in Biological Detection: From Nanosensors to Systems IV, 82120H (31 January 2012); https://doi.org/10.1117/12.908735
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Particles

Microfluidics

Luminescence

Polymethylmethacrylate

Numerical simulations

3D image processing

Optical fibers

Back to Top