Paper
15 February 2012 Fabrication and characteristic of long photonic crystal fiber taper
Peiguang Yan, Huifeng Wei, Shuangchen Ruan, Su Chen, Chunyu Guo, Jiangtao Guo, Jie Shu, Guangzhong Cao
Author Affiliations +
Abstract
In this paper, we drew a 500 m-long PCF taper directly on the industry drawing tower. The fiber taper has a uniform cross-section structure with OD from 170 μm to 70 μm, and demonstrates very good beam quality. The optical attenuation of PCF taper was measured. The optical attenuation is ~5 dB/km near 1200 nm, but the water absorption peak around 1400 nm and the attenuation beyond 1600 nm are still large. The zero dispersion wavelength (ZDW) was calculated to be ~1090 nm at the taper input end, and shifted to ~870 nm at the taper output end. The PCF taper was pumped with a picosecond laser source at wavelength of 1064 nm, and generated 200 mW output power of SC covering from ~450 nm to 1600 nm.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peiguang Yan, Huifeng Wei, Shuangchen Ruan, Su Chen, Chunyu Guo, Jiangtao Guo, Jie Shu, and Guangzhong Cao "Fabrication and characteristic of long photonic crystal fiber taper", Proc. SPIE 8240, Nonlinear Frequency Generation and Conversion: Materials, Devices, and Applications XI, 82401R (15 February 2012); https://doi.org/10.1117/12.909796
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal attenuation

Dispersion

Photonic crystal fibers

Supercontinuum generation

Structured optical fibers

Absorption

Picosecond phenomena

Back to Top