Bimetallic grayscale photomasks written using flat-top beam vs. Gaussian beam

Reza Qarehbaghi; Glenn H. Chapman; Waris Boonyasiriwat

doi:10.1117/12.909543

17 February 2012 Bimetallic grayscale photomasks written using flat-top beam vs. Gaussian beam

Reza Qarehbaghi, Glenn H. Chapman, Waris Boonyasiriwat

Proceedings Volume 8243, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVII; 824305 (2012) https://doi.org/10.1117/12.909543
Event: SPIE LASE, 2012, San Francisco, California, United States

Abstract

Grayscale photomasks are bi-layer metallic films consist of two thin layers of Bi-on-Indium or Tin-on-Indium. These films become controllably transparent by accurately varying laser power such that the optical density changes almost linearly from ~3 OD (unexposed) to <0.22OD (fully exposed). Previously, a direct-write raster-scan photomask system with a multi-line CW Argon-ion laser was used with feedback-controlled Gaussian beam to achieve 256-level grayscale masks. With the Gaussian laser spot, the feedback system was effective such that the average gray-level error reduced from ±4.2 gray-levels in an open-loop approach to ±0.3 gray-levels in a closed-loop approach. As most of the gray-level errors are due to the Gaussian beam profile making variations on the mask, a beam shaper was used to change the laser spot to a flat-top beam. Raster-scanning the mask using the flat-top beam helps further reduce the gray-level errors. Preliminary results show that the flat-top beam reduces gray-level fluctuations, and lines can be written with less overlapped area helping to have higher resolution masks. Having lines closer with smaller overlap suggests that accurately controlled laser power results in an accurate OD profile on the mask even with an open-loop approach. The accuracy of the laser power is also a reason for variations as it has only 1% accuracy. Some test patterns are written on the mask using open-loop and closed-loop approaches to demonstrate how accurate the gray-levels of the bimetallic thinfilms are using a flat-top laser beam.

Citation Download Citation

Reza Qarehbaghi, Glenn H. Chapman, and Waris Boonyasiriwat "Bimetallic grayscale photomasks written using flat-top beam vs. Gaussian beam", Proc. SPIE 8243, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVII, 824305 (17 February 2012); https://doi.org/10.1117/12.909543

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available