Design friendly double patterning

Emek Yesilada

doi:10.1117/12.915713

14 March 2012 Design friendly double patterning

Emek Yesilada

Author Affiliations +

Proceedings Volume 8327, Design for Manufacturability through Design-Process Integration VI; 832707 (2012) https://doi.org/10.1117/12.915713
Event: SPIE Advanced Lithography, 2012, San Jose, California, United States

Abstract

Double patterning using 193nm immersion has been adapted as the solution to enable 2x nm technology nodes until the arrival of EUV tools. As a result the past few years have seen a huge effort in creating double patterning friendly design flows. These flows have so far proposed a combination of decomposition rules at cell level and/or at placement level as well as sophisticated decomposition tools with varying density, design iteration and decomposition complexity penalties. What is more, designers have to familiarize themselves with double patterning challenges and decomposition tools. In this paper an alternative approach is presented that allows the development of dense standard cells with minimal impact on design flow due to double patterning. A real case study is done on 20nm node first metal layer where standard cells are designed without considering decomposition restrictions. The resulting layout is carefully studied in order to establish decomposition or color rules that can map the layout into two masks required for double patterning but without the need of complex coloring algorithms. Since the rules are derived from a decomposition unaware design they do not in return impose heavy restrictions on the design at the cell or placement level and show substantial density gains compared to previously proposed methods. Other key advantages are a simplified design flow without complex decomposition tools that can generate a faster time to market solution all at the same time keeping designers isolated from the challenges of the double patterning. The derived design rules highlight process development path required for design driven manufacturing.

Citation Download Citation

Emek Yesilada "Design friendly double patterning", Proc. SPIE 8327, Design for Manufacturability through Design-Process Integration VI, 832707 (14 March 2012); https://doi.org/10.1117/12.915713

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE