Output-only structural system identification method with a new two-stage Kalman filter and incomplete measurement

Y. Ding; B. Y. Zhao; B. Wu

doi:10.1117/12.2010507

11 April 2013 Output-only structural system identification method with a new two-stage Kalman filter and incomplete measurement

Y. Ding, B. Y. Zhao, B. Wu

Author Affiliations +

Proceedings Volume 8694, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2013; 869412 (2013) https://doi.org/10.1117/12.2010507
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2013, San Diego, California, United States

Abstract

In this paper, a two-stage time-variant structural system identification method is proposed based on incomplete structural acceleration responses. In the first stage, an external excitation identification method is developed for time-variant structural system. The unknown structural response could be re-constructed in state space and regularization method. In the second stage structural parameter is identified and updated by Extended Kalman Filter. The re-constructed structural response and identified external excitation are used in the second stage. The proposed method is validated numerically with the simulation of a fifteen-story shearing structure subject to earthquake excitation. A model of a fourteen-storey concrete shear wall building was studied experimentally with shaking table tests to further validate the proposed method. The shear wall structure has a two-storey steel frame on top with base isolation. Results from both numerical simulations and laboratory tests indicate that the proposed method can be used to identify structural parameter and external excitations effectively based on the structural acceleration responses. The proposed method is capable to identify the dynamic load and structural parameters fairly accurately with measurement noise, numerical model error and environmental disturbances.

Citation Download Citation

Y. Ding, B. Y. Zhao, and B. Wu "Output-only structural system identification method with a new two-stage Kalman filter and incomplete measurement", Proc. SPIE 8694, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2013, 869412 (11 April 2013); https://doi.org/10.1117/12.2010507

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE