Paper
13 May 2013 Scatterometry sensitivity analysis for conical diffraction versus in-plane diffraction geometry with respect to the side wall angle
Victor Soltwisch, Sven Burger, Frank Scholze
Author Affiliations +
Abstract
Extreme W scatterometry using radiation in the extreme ultraviolet photon energy range, with wavelengths around 13.5 nm, provides direct information on the performance of EUV optical components, e.g. EUV pho­ tomasks, in their working wavelength regime. Scatterometry with horizontal diffraction geometry, parallel to the grating lines (conical), and vertical scattering geometry, perpendicular to the lines (in-plane), was performed on EUV lithography mask test structures. Numerical FEM based simulations, using a rigorous Maxwell solver, compare both experimental set-ups with focus on the sensitivity of the diffraction intensities particularly with respect to the side wall angle.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Victor Soltwisch, Sven Burger, and Frank Scholze "Scatterometry sensitivity analysis for conical diffraction versus in-plane diffraction geometry with respect to the side wall angle", Proc. SPIE 8789, Modeling Aspects in Optical Metrology IV, 878905 (13 May 2013); https://doi.org/10.1117/12.2020487
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Scattering

Scatterometry

Extreme ultraviolet

Diffraction

Reflectivity

Photomasks

Finite element methods

Back to Top