A novel method for utilizing AIMS to evaluate mask repair and quantify over-repair or under-repair condition

Doug Uzzel; Anthony Garetto; Krister Magnusson; Gilles Tabbone

doi:10.1117/12.2027766

9 September 2013 A novel method for utilizing AIMS to evaluate mask repair and quantify over-repair or under-repair condition

Doug Uzzel, Anthony Garetto, Krister Magnusson, Gilles Tabbone

Author Affiliations +

Proceedings Volume 8880, Photomask Technology 2013; 888029 (2013) https://doi.org/10.1117/12.2027766
Event: SPIE Photomask Technology, 2013, Monterey, California, United States

Abstract

The ZEISS AIMS™ platform is well established as the industry standard for qualifying the printability of mask features based on the aerial image. Typically the critical dimension (CD) and intensity at a certain through-focus range are the parameters which are monitored in order to verify printability or to ensure a successful repair. This information is essential in determining if a feature will pass printability, but in the case that the feature does fail, other metrology is often required in order to isolate the reason why the failure occurred, e.g., quartz level deviates from nominal. Photronics-nanoFab, in collaboration with Carl Zeiss, demonstrate the ability to use AIMS^TM to provide quantitative feedback on a given repair process; beyond simple pass/fail of the repair. This technique is used in lieu of Atomic Force Microscopy (AFM) to determine if failing post-repair regions are "under-repaired” (too little material removed) or “over-repaired” (too much material removed). Using the ZEISS MeRiT E-beam repair tool as the test platform, the AIMS^TM technique is used to characterize a series of opaque repairs with differing repair times for each. The AIMS^TM technique provides a means to determine the etch depth based on through-focus response of the Bossung plot and further to predict the amount of MeRiT® recipe change required in order to bring out of spec repairs to a passing state.

Citation Download Citation

Doug Uzzel, Anthony Garetto, Krister Magnusson, and Gilles Tabbone "A novel method for utilizing AIMS to evaluate mask repair and quantify over-repair or under-repair condition", Proc. SPIE 8880, Photomask Technology 2013, 888029 (9 September 2013); https://doi.org/10.1117/12.2027766

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available